SUKO is attending a manufacturing expo in Bangkok
Are you still worried about semi-automatic machines on the market? Are you still anxious about the equipment for Polymer/PTFE/UHMWPE products? This is a good opportunity now!
SUKO is attending the Manufacturing Expo(ME) in Bangkok, Thailand on June19-22, 2019. ME is an event dedicated to machinery and technology for manufacturing and supporting industries, It fully reflects the level of machinery manufacturing and mechanical equipment development in Asian.
Here are some popular products we produced: Auto extrusion/bush molding machine, Auto Gasket Machine, UHMWPE Rod Extruder, PTFE Tube Extruder, etc. They are all automatic machines, which help customers improve productivity and quality. These products also have longer working life and are friendly to environment.
The specific marketing advantages are as follows:
ü PTFE Automatic Press Molding Machine-It is suitable for pipe and rod, it has PLC control and screen touch system. Furthermore, if PTFE powder is exhausted, it will alarm Automatically.
ü Auto Gasket Machine-It has advantages of environmental protection, time saving, high efficiency, long service life, good heat dissipation and good quality of accessories.
ü UHMWPE Rod Extruder- It can extrude 3-9 million molecular weight of raw materials.
Come to this event, Here are the newest innovations and solutions by 2,400 brands from 46 countries.
Come to our booth, We have professional and technical personnel to solve your problems immediately. What’s more, plenty of advanced and complete equipment for your choice, such as PTFE AutomaticPress Molding Machine, Auto Gasket Machine, UHMWPE/PTFE Rod Extruder and so on. In addition, at the international exhibition, you can consult a wide range of topics for your needs, or compare a large amount of manufacturers to select your favorite devices.
Detailed exhibition information is as follows.
Time：June 19-22, 2019
Address：Bangkok International Trade and Exhibition Centre，
88 Bangna-Trad Road (Km.1), Bangna, Bangkok 10260, Thailand
Booth Number：3D34
We sincerely hope to establish long-term cooperation with you, we will try our best to provide high quality and excellent service, we will cherish every opportunity to cooperate with you!
Looking forward to your visit!
What is expanded tetrafluoroethylene seal tape?
Expanded tetrafluoron sealing belt is made of pure Polytetrafluoroethylene dispersion resin, which is stretched at high temperature through lamination.it has low friction coefficient, good resistance to chemical corrosion and airtightness, and can be used at the temperature of -250℃--+280℃ for the sealing of reaction kettle, steam transmission generator and all kinds of special-shaped cans and drums.
The expanded tetrafluoroethylene sealing tape can be pasted on the flange sealing surface.Flange sealing part under medium and low pressure is an economical and practical sealing material.
The expanded tetrafluoroethylene sealing belt retains the chemical corrosion resistance of ptfe, and at the same time, it has flexibility, compression strength, excellent creep resistance, cold flow resistance and tensile strength.
Production process and application of ptfe film
Ptfe film processing equipment will use a Isostatic Moulding Press Machine, Isostatic Moulding Press Machine production bar, and then sintering, finally using a Skiving Machine for Skiving.
Ptfe films are mainly divided into two types: microporous film and turning film.The biggest difference between the two is the permeability of microporous membrane, which is produced by biaxial stretching.Turning film is cut out of the lathe, it does not breathe.
I do not know about turning film, know that it should be used on the seal more.We're going to talk about microporous membranes.
Polytetrafluoroethylene (ptfe) microporous film is made of polytetrafluoroethylene resin particles, which is expanded and stretched to form a microporous film. It can be divided into the following categories:
- Air filtration membrane
Polytetrafluoroethylene membranes can be used for atmospheric dust removal, air purification and so on the membrane pore size can be controlled 0.2 um, porosity can reach more than 88%, and the needle felt, mechanism of cloth, non-woven fabric, glass fiber and other filter material with surface phase composite filtering performance of coated fabric, PTFE coated filter material has high peel strength, air volume, uniform pore size distribution, etc.As a dust bag or fold type dust removal filter cartridge installed within the dust removal equipment, will be promptly and efficiently calculated intercept with micron ultra fine dust, dust removal efficiency can reach more than 99.99%, the service life for three years, ventilation rate of up to 3-6 m/min, is currently the world's most advanced air filtration material, all kinds of vacuum cleaners, air filter, air purification equipment, the best choice for high efficiency air filter, etc.
Technical parameters are as follows:
Thickness: 5 um - 15 um
Air permeability: 80-100l /㎡•s
Width: 1800 mm or less
Resistance: pa 80 or less
Efficiency: 99.99%
- Waterproof and moisture-permeable microporous membrane
Ptfe waterproof moisture permeable microporous membrane is made and approved by a special process the bidirectional tensile membrane surface per square inch can reach billions of a microporous, each pore diameter (0.5 to 0.1 um um) is less than the minimum water molecules in the mist of the minimum value (20 UN um - 100), the diameter greater than the water vapor molecules (0.0004 to 0.0003 um um), the water vapor through the water, and cannot pass, take advantage of the microporous structure can achieve excellent waterproof and moisture permeable function;In addition, because the hole is extremely small and longitudinal irregular bending arrangement, so that the wind can not pass through, and thus has good wind protection and heat preservation characteristics.Since the advent of the membrane through continuous improvement, special treatment on the PTFE film, its fastness and durability greatly improved, after composite with other fabrics, widely used in the greenwood clothing, medical clothing, leisure clothing, fire control, chemical protective, antivirus, flooding operation, such as special protective clothing, outdoor sports clothing, shoes and hats, gloves and other accessories as well as sleeping bags, tents and other materials
Technical parameters are as follows:
Thickness: um 20-50 um
Moisture permeability: 16000g/㎡•24hr
Hydrostatic pressure: 6000mm
Extreme uv resistance: 97 highest
Width: 1700 mm or less
G: 5-10 g/m2
- teflonbubble point film
It with polytetrafluoroethylene (ptfe) as raw material, after puffing stretch forming a kind of microporous membrane, the membrane with a special process combined with on all kinds of fabric and base material, become a new type of filtration material, the membrane pore size is small, about 0.2 to 0.5 mu m, uniform distribution, porosity, while maintain the air circulation, can filter all of the dust particles, including bacteria, achieve the goal of advanced purification and ventilation, it is widely used in pharmaceutical, biochemical, microelectronics and laboratory consumables, etc.
Technical parameters:
Thickness width bubble point
1600mm ≥1kg/cm2 (5.3m/s 127Pa)
Keywords: ptfe, Polytetrafluoroethylene, teflon, film, Moulding, bar, sintering, Skiving, Machine
What is the PFA
- What is the PFA?
The English name of PFA is Polyfluoroalkoxy, or tetrafluoroethylene perfluoroalkoxyethylene ether copolymer (perfluoroalkylate, soluble polytetrafluoroethylene).PFA resin is relatively new fluoroplastic that can be processed by melting. PFA, FEP and PTFE have similar chemical properties, but FEP can only be used below 200 degrees, and PTFE cannot be injected. 【this resource was first published by China fluoroplastics network.】
- Specific gravity: 2.13-2.167g/cubic centimeter
- Molding shrinkage rate :3.1-7.7%
- Molding temperature: 350-400℃
- The melting point of PFA is about 580F and the density is 2.13-2.16g /cc (g/ cubic centimeter).
- Features and main USES of PFA
PFA, commonly known as fusible PTFE, is the crown of fluoroplastics with various properties and USES similar to FEP.Widely used in semiconductor industry, as well as medical, chemical corrosion protection, automotive and other fields.
PFA products include granular products for molding and extrusion, and powdery products for rotating molding and coating.Its semi-finished products are membrane, plate, rod and pipe.PFA resin distributed in the American market includes Teflon of DUPOut, Neoflon of Daikin, Hthen of Ansimont and Hostafl of HOechst Celanese.
- Main USES of PFA:
(1). Suitable for making corrosion resistant parts, wear - resistant parts, seals, insulation parts and medical equipment parts.
(2). High temperature wire, cable insulation layer, anti-corrosion equipment, sealing materials, pump valve bushing, and chemical containers.
- Molding performance
(1). Crystallization material, small moisture absorption.Products may be processed by the usual thermoplastic processing method.
(2). Poor liquidity, easy decomposition, decomposition produced corrosion gas.It is advisable to strictly control the molding temperature not to exceed 475 degrees, the mold should be heated to 150-200 degrees, the pouring system should have little resistance to the material flow.
(3). Translucent granule, injection molding, extrusion molding.Forming temperature 350-400 degrees, 475 degrees above easy to cause color or bubble.And notice that it's harder to get out of the mold.
(4). Because the molten material on the metal corrosion effect, long-term production, the mold needs to electroplate chromium treatment.
- Material performance
- PFA is a copolymer of a small amount of perfluoropropyl perfluoroethylene ether and polytetrafluoroethylene.The melt bond is increased, the solution viscosity is decreased, and the performance is not changed compared with ptfe.The resin can be processed into products directly by ordinary thermoplastic molding.
- long-term use temperature -80- 260 degrees, excellent chemical corrosion resistance, corrosion resistance to all chemicals, friction coefficient in the lowest plastic, and very good electrical performance, its electrical insulation is not affected by temperature, "plastic king" said.
- Its chemical resistance is similar to ptfe and better than vinylidene fluoride.
- Its creep resistance and compression strength are better thanptfe, with high tensile strength and elongation up to 100-300%.Good dielectric property, excellent radiation resistance.
- non-toxic: with physiological inertia, can be implanted in the human body.
Keywords: Moulding, Plastic, Polymer Extruder, PTFE, PTFE Extrusion, PTFE Tube
The application of UHMWPE material is introduced
In recent years, UHMWPE has been widely used in board, profile, pipe and other main fields.Market research shows that UHMWPE has become a widely used industrial raw material with its excellent abrasion resistance, which is widely used in coal mining, shipbuilding, floor MATS and other occasions and products. These products need certain processing technology, the use of some equipment: for example, UHMWPE/PTFE tube extrusion machine, Polymer/Teflon bar extrusion machine, molding machine, Polymer PTFE sintering furnace, PTFE Gaskets Press moulding machine, etc. In recent years, China's demand for this product is increasing day by day.
UHMWPE separator is basically used in automobile battery manufacturing industry in developed countries in Europe and America.UHMWPE can also be used for viaduct as underrail spacer. UHMWPE film is based on UHMWPE board, which is a film with a thickness of less than 1 mm after cutting.Ninety percent of UHMWPE's customers are electronics floor mat manufacturers, and up to 95 percent of them are used for mouse floor MATS.There are some differences in the use of UHMWPE fiber between Europe and America and Japan. It is mainly used for body armor and weapons and equipment, accounting for 60% ~ 70% of the total consumption, followed by cables, fishing nets and labor protection supplies.Japan is mainly used for cables, fishing nets and labor protection equipment.
Compared with teflon (teflon) used in traditional mouse pad, UHMWPE film is more wear-resistant, and its self-lubricity is second only to teflon material.Cost, UHMWPE film density is small, according to square conversion UHMWPE film than fluron 50% lower.Therefore, UHMWPE film has gradually replaced teflon as the preferred raw material for floor MATS in OEM factories.
Keywords: UHMWPE, PTFE, Polymer, Teflon, extrusion, Gaskets,UHMWPE film, extrusion machine, sintering furnace
Introduction to ptfe teflon pipes
Ptfe teflon tube extrusion machine is divided into many kinds, exactly say ptfe tube forming process has push and pressure method, extrusion method, hydraulic method, welding method, winding method, etc., which is mainly push and pressure method.Generally dispersed PTFE resin with particle size of 500 microns and apparent density of 0.45g/ml ~ 0.55g/ml is adopted.The small diameter tube chooses the compression quite big resin, the medium and large diameter tube chooses the compression quite small resin.Extruder usually choose 200 and 260 solvent oil.PTFE thermal shrinkage tube, PTFE spiral tube, PTFE steel wire reinforced hydraulic tube and so on can be produced by the secondary processing of PTFE tube.
1.1 common ptfe teflon pipe
Ptfe ordinary tube is made of ptfe dispersion resin at room temperature with organic solvent as extruder, and then through drying and sintering.According to the size of the pipe diameter can be divided into two types of ordinary pipe and micro pipe.Ordinary tube inner diameter > 4mm, micro tube inner diameter ≤4mm.
Typical formula for PTFE tube production:
Dispersed PTFE resin: 100 (weight)
Extruder: 18 ~ 24
Production process:
PTFE, extruder - mixing - pushing - pressing - drying - sintering - cooling - products.
Production process parameters:
Mixing: temperature ≤19 ℃, time 10min ~ 20min, mixed at 25 ℃ ~ 30 ℃ for more than 24h.
Blank: compression rate is about 50mm/ min, pressure is 0 ~ 3MPa.
Pushing pressure: the cavity temperature is 30 ℃ ~ 50 ℃, and the die temperature is 50 ℃ ~ 60 ℃.
Drying: under 210 ℃,2h ~ 3h
Sintering: batch sintering, temperature rise rate of 60 ℃/ h,375 ℃±5 ℃ insulation for 4h.
Continuous sintering, dry area 100 ℃ ~ 250 ℃, preheating area 250 ℃ ~ 330 ℃, sintering area 380 ℃ ~ 420 ℃, cooling area less than 300 ℃.
Main equipment: mixing machine, preforming machine, vertical pushing press, drying and sintering furnace.
USES: as insulation and fluid conduit.
1.2 polytetrafluoroethylene heat-shrinkable tube
PTFE thermal shrinkable tube has the property of being heat-shrinkable, so it can be tightly coated on the surface of other workpieces, making the workpieces resistant to corrosion, electrical insulation and viscosity.Widely used in electrical, chemical, mechanical, printing and other industries.The maximum shrinkage of PTFE shrink tubes is reported to be more than 75%.
It is processed by disperse PTFE resin. The principle is that PTFE is subjected to stress during processing and produces forced high-elastic deformation, which is reversible and freezes at low temperature. If the forced high-elastic deformation is reheated, it will gradually disappear and return to the original state.
Typical formula for PTFE thermal shrinkable tube production:
Disperse PTFE resin 100 (weight)
Extruder 20 ~ 22
Production process:
PTFE resin, extrusion aid → mixing → storage → pre-molding → pushing and pressing → drying → sintering → cooling → heat treatment → blowing → cooling → product.
Production process parameters:
The front part is the same as ordinary PTFE tube.
Heat treatment: the quenching process of the dried and sintered pipes after further full sintering at high temperature, the temperature is 390 ℃±2 ℃, and the coolant is -5 ℃.
Blowing: at 310 ℃ or so, fill the compressed gas below 0198MPa, the blowing rate is 200% ~ 400%.
Main equipment: blowing machine, other PTFE tube and the same.
1.3 ptfe teflon steel wire reinforced hydraulic pipe
The common PTFE pipe will break under the pressure of about 40kg/ cm2. When it is combined with steel wire, the pressure resistance will be greatly improved. The maximum working pressure abroad reaches 700kg/ cm2.The results show that the compressive strength and pulse strength of the hose are related not only to the steel wire strength but also to the weaving Angle.When the braiding Angle is 54°44 "for single-layer braiding, the steel wire does not extend under internal pressure, the length and diameter of the hose do not change, and the pressure resistance is the best.
When used as hose for hydraulic system in aviation industry, in order to prevent electrostatic breakdown of inner tube caused by hydraulic oil flow, trace conductive carbon black should be added in the manufacture of PTFE inner tube.However, it was found that adding carbon black could not completely prevent electrostatic discharge from passing through the tube wall and increase the gap.
In the 1960s, Attas manufactured composite tubes, in which the inner layer of the tubes was a uniform mixture of conductive carbon black and PTFE, and the outer layer of the tubes was pure PTFE.This form of tube body layer has axial conductivity, so it can not only eliminate static electricity, but also prevent seepage.
The process:
Inner resin (including conductive carbon black), outer resin → blank → pushing → drying → cooling → testing → weaving → fitting joints → testing.
PTFE steel wire composite hose is mainly used in aircraft hydraulic system, air conditioning system, fuel system, lubricating oil system.In civil industry, it is suitable for soft connection of hydraulic pressure, steam pressure and steam transportation in rubber, plastic, pharmacy, clothing, shipbuilding, automobile, machine tool, motor, diesel engine and paper making industries.
PTFE spiral tube, also known as PTFE flexible hose, has not only all the excellent properties of PTFE, but also flexible properties.At present, there are two kinds of PTFE spiral tube and chemical fiber, stainless steel wire and plastic coated glass fiber woven reinforcement.
It is made of PTFE through secondary processing. The process is that PTFE thin-walled tube continuously rotates forward through a combination mold with a temperature of 270 ℃ ~ 280 ℃ at a certain speed.
It is mainly used for the inlet and outlet pipes of the shock parts such as the soft connection dislocation connection, serpentine pipes, pump engines and so on.Used for shielding cable and protecting cable sleeve of aircraft engine.
Keywords: PTFE, Ptfe tube, teflon, tube, ptfe pipe, machine, extrusion, extrusion machine, pushing, sintering, extruder
PLC control system of Polymer extruder
The PLC control system of extruder has been widely used in many fields such as cemented carbide, pharmaceutical, food processing and mechanical processing. Extrusion technology is widely used because it can obtain products with uniform density in the direction of extension and high production efficiency. Currently on the market for some extrusion machine, such as: Polymer Teflon Rod extruder, PTFE UHMWPE tube extruder,etc. extrusion machine while there are almost one hundred years of history, but with the rapid development of information technology, all kinds of information technology in the layer, especially the detection technology, PLC control technology,microelectronics technology and modern control technology development puts forward new challenge on the extrusion machine. It is very important to study the application of PLC control system because the control system is developed in high efficiency, high speed and high precision.
With the rapid development of manufacturing industry, industrial aluminum profiles have been widely used in various high-tech industries, such as aviation, bullet trains, ships and so on. The forming technology of metal aluminum profile mainly includes extrusion, forging and calendering. According to the extrusion molding process, such as the whole process will use the Polymer Teflon bar extruder, PTFE UHMWPE tube extruder, MouldingMachine, PTFE Gaskets Press Moulding Machine, Cutting Machine, PTFE Skiving Machine, Dry Grinder, cleaning machine, vibration screen, automatic feeding machine. The control system of extruder is emphasized. This set of control system combines PLC, MES and upper computer to realize online intelligent management, visual management, process control, process analysis and product traceability of production process.
Isothermal extrusion speed control is an important method for high efficiency and high quality production in rare metal processing enterprises. Different raw materials (Polymer, PTFE, Teflon, UHMWPE), extruder extruded products are different, such as color, shape, density, etc. According to the characteristics of the treasure titanium 25M extrusion machine equipment, combined with the actual production condition, titanium simulation of isothermal extrusion speed control system, put forward to simulate the isothermal extrusion speed control system architecture and function of system implementation, is developed based on industrial PC + PLC titanium simulation of isothermal extrusion speed control system, using the prediction algorithm to build the extrusion speed prediction model. The system can achieve isothermal extrusion of titanium, shorten the extrusion time, and operate reliably.
keywords : Extrusion machine, Polymer , PTFE , Teflon ,UHMWPE , extrusion ,extruder ,Automation, Teflon rod, PTFE tube, bar extruder, tube extruder, Gaskets, Machine, Moulding, control
